Beltronics BELV965 - Radar Detector With DSP High SENSIT Owner's Manual download pdf (Page 4)

To begin using your V10, just

follow these simple steps

:

1 Plug the small end of the power cord

into the side jack of the detector, and

plug the large end of the power cord

into your car’s lighter socket.

2 Mount your V10 on the windshield

using the supplied windshield mount.

3 Press the PWR button, located top left,

to turn the

V10 on.

4 Press and hold the Volume/Mute

button to adjust the volume.

Please read the manual to fully understand

your

V10’s operation and features.

QuickMount Slot

Insert the

V10’s adjustable Windshield

mount into this slot. Page 7

QuickMount Button

Press the button, and slide the Windshield

mount into one of its four locking

positions. Page 7

City Button

Switches between AutoScan, City and

Highway settings. In general, we

recommend AutoScan. Page

8

Power

Press the PWR button to turn the V10 on

or off.

Page 8

Volume

Press and hold the Volume/Mute button to

adjust the alert volume level.

Page 8

AutoMute

V10’s patented AutoMute automatically

reduces the volume level of the audio alert

after a brief period. If you prefer, you can

turn AutoMute off. Page 8

Programming

Your

V10 is ready to go, just plug it in and

turn it on. But you can also easily change

7

features for your preferences. Page

s 12-16

Radar Antenna and Laser Lens

The rear panel of your

V10 should have

a clear view of the road ahead. For best

performance, do not mount the

V10

directly behind windshield wipers

or tinted areas. Page 6

Alphanumeric Matrix Display

Your

V10’s display will show Highway,

AutoScan, or City as its power-on

indication. If you prefer, you can choose

other power-on indications. Pages 12-14

During an alert, the display will

indicate radar band, and a precise bar graph

of signal strength. Page 1

1

NOTE: In the Dark Mode the display

will not light during an alert. Page 9

The display can also show Safety Radar

text messages. Pages 22-23

Rear Laser Port

Receives laser signals from behind the

vehicle.

Earphone Jack

Accepts standard 3.5mm MONO earphone.

Brightness Button

Press to adjust display brightness. There are

three brightness settings, plus Dark Mode.

In the Dark Mode, the power-on

indication will be changed to a dim “AD

,”

“HD

,” or “CD” (indicating AutoScan, Dark,

Highway Dark, or City Dark). In the Dark

Mode,

V10’s meter will not display during

an alert, only the audio will alert you.

Page 9

Power Jack

Plug the power cord into this connector.

Page 6

Volume and Mute Button

Press and hold to adjust the volume level.

Brieﬂy press this button (above the

display) to silence the audio for a speciﬁc

alert. Page 8

Quick Reference Guide

4 5

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments