Beltronics BELV965 - Radar Detector With DSP High SENSIT Owner's Manual download pdf (Page 2)

The Vector V10 is the most advanced radar,

laser and safety detector ever designed by

Beltronics.

The BEL V10 includes full X, K,

SuperWide Ka, and Safety Warning System

radar capability, front and rear laser

detection, digital signal processing (DSP)

for superior range and reduced false

alarms, our patented Mute and AutoMute,

audible and visual band alerts, and all the

performance you’d expect from Beltronics.

In addition, the BEL V10 introduces a

new level of revolutionary performance

and innovative features.

• Superior long-range radar and laser

detection, including new “POP”

mode alert

• Advanced Programming lets you

customize 7 features

• AutoScan mode drastically reduces

false alarms, plus Highway and City

settings

• Ultra-bright alphanumeric Display

with 280 LEDs

• Exclusive Threat Display tracks and

displays multiple radar signals,

including signal strength.

• Tech Display provides actual

numeric radar frequency for any

radar signal

• New Programmable Bands (on/off),

including International and North

American settings.

• Detects and decodes Safety Warning

System messages

• Includes coiled SmartCord

If you’ve used a radar detector before,

a review of the Quick Reference Guide on

pages 4 and 5, and the Programming

information on pages 12 and 13 will brieﬂy

explain the new features.

If this is your ﬁrst detector, please read

the manual in detail to get the most out of

your V10’s outstanding performance and

innovative features.

Please drive safely.

Congratulations Quick Reference Card

FCC Note:

Modiﬁcations not expressly approved

by the manufacturer could void the

user’s FCC granted authority to operate

the equipment.

 Remove card along perforations 

Preferences Details 

Beltronics V10 Quick Reference Card

There are 7 user-selectable options so you

can customize your V10 for your own

preferences.

The buttons labeled CITY and BRT are

also used to enter the Program Mode,

REVIEW your current program settings,

and to CHANGE any settings as desired.

The words PGM, RVW and CHG are

located on the top of the detector, and are

highlighted in graphics.

How to use Programming

1 To enter Program Mode, press and

hold both CITY and BRT buttons down

for 2 seconds. The unit will beep twice,

and will display the word Program.

2 Then press the RVW button to review

the current settings. You can either tap

the button to change from item to item, or

hold the button to scroll through the items.

3 Press the CHG button to change any

setting. You can either tap the button to

change from setting to setting, or hold the

button to scroll through all the options.

4 To leave Program Mode, simply wait

8 seconds without pressing any

button, or press the PWR button. The

unit will display Complete, beep, and

return to normal operation.

Factory Default Settings

To reset your V10 to its original factory

settings, press and hold the “CIT

Y” and

“BRT” buttons while turning the power

on. The V10’s display will provide a

Reset message, accompanied by an

audible alert, acknowledging the reset.

An example

Here is how you would turn the V10’s

AutoMute feature off.

1 Enter the Program Mode by holding

both the CITY and BRT buttons down for

2 seconds. The

V10 will beep twice and

display

Program.

2 Then hold the RVW button down. V10

will scroll through the categories, starting

with Pilot

(Pilot), then Voice ( Voice),

then Power-On sequence

(PwrOn), then

Signal Strength Meter

(Meter), and then

AutoMute (

aMute).

3 Release the RVW button when the V10

shows the AutoMute item. Since the

factory setting is for AutoMute to be on,

the V10 will display aMute ON.

If you accidentally don’t release the

Review button in time, and the V10 goes

to the next category, hold the RVW button

down again, and after the V10 scrolls

through all categories, it will begin again

at the top of the list.

4 Press the CHG button to change from

aMute ON to aMute OFF.

5 To complete the Programming, simply

wait 8 seconds without pressing any

button, or press the PWR button.

The V10

will display

Complete, beep 4 times, and

return to normal operation.

1 2 3 4 5 6 7 ... 15 16

Comments to this Manuals

No comments

Beltronics BELV965 - Radar Detector With DSP High SENSIT Owner's Manual Page 2

Comments to this Manuals

Related products and manuals for Radar detectors Beltronics BELV965 - Radar Detector With DSP High SENSIT