Beltronics BELV965 - Radar Detector With DSP High SENSIT Owner's Manual download pdf (Page 14)

Problem

V10 beeps brieﬂy at the same

location every day, but no radar

source is in sight.

V10 does not seem sensitive to

radar or laser.

V10 did not alert when a police car

was in view.

V10 did not provide a Safety Signal

while within range of an

emergency vehicle.

V10’s display is not working.

V10’s audible alerts are less loud

after the ﬁrst few alerts.

V10 bounces or sags on windshield.

V10’s power-on sequence

reoccurs while you are driving.

Solution

• An X or K-band motion sensor or intrusion alarm is located

within range of your route. With time, you will learn

predictable patterns of these signals.

• Make sure that windshield wipers do not block V10’s radar

antenna and that the laser lens is not behind tinted areas.

• Determine if your vehicle has an Instaclear

, ElectriClear

or solar reﬂective windshield which may deﬂect radar or laser

signals.

• V10 may be in City Mode.

• VASCAR (Visual Average Speed Computer and Recorder) a

stopwatch method of speed detection, may be in use.

• Ofﬁcer may not have radar or laser unit turned on.

• Safety transmitters may not be commonly used in your area.

• Press the BRT button to deactivate Dark Mode.

• V10 is in AutoMute Mode. See page 8 for details.

• V10 is not making contact with the windshield to provide

stability. While holding down V10’s QuickMount button, slide

V10 toward the windshield so that the back top edge makes

ﬁrm contact.

• A loose power connection or dirty lighter socket can cause

V10 to be brieﬂy disconnected.

Problem

Your 14-year old son has changed

all 7 of the Programming options.

V10 will not turn on.

V10 feels very warm.

Solution

• You can return all of the programming options to the

factory defaults by holding down the CITY and BRT buttons

while you turn V10 on.

• Check that the power is ON.

• Check that vehicle ignition is ON.

• Check that vehicle lighter socket is functional.

• Try

V10 in another vehicle.

• It is normal for V10 to feel warm.

Explanation of Displays

AD Sensitivity control is in Auto mode, display is in Dark mode (page 9)

HD Sensitivity control is in Highway mode, display is in Dark mode (page 9)

CD Sensitivity control is in City mode, display is in Dark mode (page 9)

No display

V10 is in the Dark mode, and is programmed for Dark All (page 9)

PilotHWY One of the many programming messages (pages 12-16)

WorkZone One of the many Safety Radar messages (pages 22-23)

Caution V10 has detected a Safety Radar Signal, but the signal isn’t yet strong

enough to decode the speciﬁc safety message (page 22-23)

X5, or K5, V10 has been programmed in the Threat Display mode (page 10-11)

KA9 etc.

VG2 V10 has detected a VG2 unit (radar detector detector)

24 25

Troubleshooting

1 2 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Beltronics BELV965 - Radar Detector With DSP High SENSIT Owner's Manual Page 14

Comments to this Manuals

Related products and manuals for Radar detectors Beltronics BELV965 - Radar Detector With DSP High SENSIT