Beltronics BELV965 - Radar Detector With DSP High SENSIT Owner's Manual download pdf (Page 4)

To begin using your V995,

just follow these simple steps

:

1 Plug the small end of the power cord

into the side jack of the detector, and

plug the large end of the power cord

into your car’s lighter socket.

2 Mount your V995 on the windshield

using the supplied windshield mount.

3 Press the PWR button, located top left,

to turn the V995 on.

4 Press and hold the Volume/Mute

button to adjust the volume.

Please read the manual to fully understand

your V995’s operation and features.

QuickMount Slot

Insert the V995’s adjustable Windshield

mount into this slot. Page 7

QuickMount Button

Press the button, and slide the Windshield

mount into one of its four locking

positions. Page 7

City Button

Switches between AutoScan, City and

Highway settings. In general, we

recommend AutoScan. Page 9

Power

Press the PWR button to turn the V995 on

or off.

Volume

Press and hold the Volume/Mute button to

adjust the alert volume level.

Page 8

AutoMute

V995’s patented AutoMute automatically

reduces the volume level of the audio alert

after a brief period. If you prefer, you can

turn AutoMute off. Page 8

Programming

Your

V995 is ready to go, just plug it in and

turn it on. But you can also easily change

7

features for your preferences. Page

12-16

Radar Antenna and Laser Lens

The rear panel of your V995 should have

a clear view of the road ahead. For best

performance, do not mount the V995

directly behind windshield wipers

or tinted areas. Page 6

Alphanumeric Matrix Display

Your V995’s display will show Highway,

AutoScan, or City as its power-on

indication. If you prefer, you can choose

other power-on indications. Page

12-14

During an alert, the display will

indicate radar band, and a precise bar graph

of signal strength. Page 1

1

NOTE: In the Dark Mode the display

will not light during an alert. Page 9

Rear Laser Port

Receives laser signals from behind the

vehicle.

Earphone Jack

Accepts standard mono 3.5mm earphone.

Brightness Button

Press to adjust display brightness. There are

three brightness settings, plus Dark Mode.

In the Dark Mode, the power-on

indication will be changed to a “AD

,” “HD,”

or “CD” (indicating AutoScan Dark,

Highway Dark, or City Dark). In the Dark

Mode, the V995’s meter will not display

during an alert, only the audio will alert you.

Page 9

Power Jack

Plug the power cord into this connector.

Page 6

Volume and Mute Button

Press and hold the Volume/Mute button to

adjust the alert volume level. Page 8

Brieﬂy press this button to silence the

audio for a speciﬁc alert. (The audio will

alert you to the next encounter.) Page 8

Quick Reference Guide

4 5

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments