Beltronics BELV965 - Radar Detector With DSP High SENSIT Owner's Manual download pdf (Page 10)

Details of Programming

Bands

BandsDFT

In this setting, all North American radar and

laser frequencies are monitored. This is the

factory setting and it is recommended that

you use your V995 in this mode.

BandsMOD

In this setting, your V995 will warn you

with an audible alert, and associated text

message stating which band has changed

from the original factory setting (i.e. “SWS

ON”). This warning is displayed during the

start up sequence (standard or fast).

WARNING: Do not turn off a band

unless you are absolutely certain that

there are no trafﬁc radar units using

that speciﬁc band in your area.

16 17

Features and Speciﬁcations

Operating Bands

• X-band 10.525 GHz ±

25 MHz

• K-band 24.150 GHz ±

100 MHz

• Ka-band 34.700 GHz ±

1300 MHz

• Laser 904nm, 33 MHz bandwidth

Radar Receiver / Detector Type

• Superheterodyne, VTO

• Scanning Frequency Discriminator

• Digital Signal Processing (DSP)

Laser Detection

• Quantum Limited Video Receiver

• Multiple Laser Sensor Diodes

Display Type

• 280 LED Alphanumeric

• Bar Graph

• 3 Levels of Brightness, plus Dark Mode

Power Requirement

•

12VDC, Negative Ground

• Power cord (included)

Programmable Features

• Power-On Indication

• Voice Alerts

• Power-On Sequence

• Signal Strength Meter

• AutoMute

• City Mode Sensitivity

• Radar / Laser Bands

Sensitivity Control

• Highway, AutoScan and City

Auto Calibration Circuitry

VG2 Immunity

Dimensions (Inches)

• 1.25 H x 2.75 W x 4.75 L

Technical Details

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments