Beltronics GX65 User Manual download pdf (Page 9)

How to use Programming Overview of Programming

14 15

Press the BRT button

to go from one category

to the next

PILOT LIGHT

(Power-on indication)

SPEEDCHECK

SIGNAL STRENGTH METER

AUTOMUTE

UNITS

VOICE

BANDS

MARKERS

* Restoring the Factory Default Settings

To restore your GX65 to its

original factory settings, press

and hold the “SEN” and “BRT”

buttons while turning the power

on. A Reset message will be

displayed, accompanied by an

audible alert, acknowledging

the reset.

Pilot HWY

Pilot H

Pilot V

Pilot SPD

Spdck ON

Spdck OFF

Meter STD

Meter THT

Meter TEC

aMute ON

aMute OFF

Units ENG

Units MET

Voice ON

Voice OFF

Bands DFT

Bands MOD

X ON or OFF (default is on)

Ku ON or OFF (default is off)

K ON or OFF (default is on)

Ka ON or OFF (default is on)

POP ON or OFF (default is off)

SWS ON or OFF (default is off)

LSR ON or OFF (default is on)

Marks DFT

Marks MOD

rCam ON

or OFF (default is on)

sCam ON or OFF (default is on)

sTrap ON or OFF (default is on)

Othr ON or OFF (default is on)

Press the MRK button

to change your setting

within a category

* Full word: Highway or AutoScan

Letter: H or A or C or ANX

Vehicle voltage

Vehicle speed

* Displays current speed during alert

SpeedCheck feature off

* Standard signal strength meter

Threat Display mode

Tech Display mode

* Automatically reduces audio during alert

AutoMute feature is off

* Speed/distance in English units

Speed/distance in Metric units

* Voice announcements on

Voice announcements off

* Default settings

Bands have been modified

Turn bands on/off by

pressing the Mute button

There are 8 user-selectable Programming

options so you can customize your GX65

for your speciﬁc driving needs. The

buttons labeled “MRK” and “BRT” are

also used to enter Programming, REVIEW

your current settings, and to CHANGE any

settings as desired. The word PGM is

located on the top of the detector, and is

highlighted in colored graphics. Pages 16-

18 explain each option in more detail.

How to use Programming

1 To enter Programming, press and

hold the “MRK” and “BRT” buttons down

for 2 seconds. The unit will beep and

display the word Program.

2 Then press the “BRT” button to

review the current settings. You can either

tap the button to change from item to item,

or hold the button to scroll through the

items.

3 Press the “MRK” button to change

any setting. You can either tap the button

to change from setting to setting, or hold

the button to scroll through all the options.

4 To exit Programming, simply wait 8

seconds without pressing any button, or

press the power button

. The unit will

display

Complete, beep and return to

normal operation.

An example

Here is how you would turn GX65’s

AutoMute feature oﬀ.

1 Enter Programming by holding both

the “MRK” and “BRT” buttons down for 2

seconds. The GX65 will beep and display

Program.

2 Hold the “BRT” button down. GX65

will scroll through the categories, starting

with Pilot Light

(Pilot), then SpeedCheck

(spdck), Signal strength meter (Meter),

and then AutoMute

(aMute).

3 Release the “BRT” button when the

GX65 shows the AutoMute item. Since the

factory setting is for AutoMute to be on, the

GX65 will display aMute ON.

If you accidentally don’t release the “BRT”

button in time, and the GX65 goes to the next

category, simply hold the “BRT” button down

again and the GX65 will scroll through the

categories.

4 Press the “MRK” button to change from

aMute ON to aMute OFF.

5 To complete choosing your

Programming, simply wait 8 seconds

without pressing any buttons, or press the

power button. The GX65 will display

Complete, beep and return to normal

operation.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Comments to this Manuals

No comments

Beltronics GX65 User Manual Page 9

Comments to this Manuals

Related products and manuals for Sports and recreation Beltronics GX65