Beltronics STiR Plus Specifications download pdf (Page 8)

12 13

Details of Programming

Voice

Voice On (Voice announcements on)

In this setting, all radar, laser, and SWS

messages (if programmed) will be

announced using a digital voice.

Voice Off (Voice announcements off)

In this setting, only the distinct audio tone

will be heard when a radar, Laser, or SWS

message is detected.

Power-on Sequence

PwrOnSTD (Standard)

In this setting, each time you turn on the

STi-R, it will display “Bel STi-R,” “LASER,”

“Ka-band,” “K-band,” “X-band,” followed by

a brief SWS alert. (factory default)

If any of the factory default bands

have been disabled, a double X-band tone

and corresponding message (i.e. “X OFF”),

will alert you that one or more bands have

been turned off.

PwrOnFST (Fast power-on)

In this setting, the STi-R will provide a

single X-band tone if the factory default

settings have not been changed. If any of

the factory default band settings have

been disabled, a double X-band tone and

corresponding message (i.e. “X OFF”), will

alert you that one or more bands have

been turned off.

Signal Strength Meter

MeterSTD (Standard meter)

In this setting, the meter displays the band

of the received signal, and a bar graph

shows the relative signal strength. (factory

default)

MeterTHT (Threat Display)

In this setting, the meter will

simultaneously track multiple radar

signals, including relative signal strength

for each.

MeterTEC (Tech Display meter)

In this setting, the meter displays the

actual numeric frequency of the radar

signal received.

NOTE: The Tech Display feature is

explained in more detail on page 9.

AutoMute

aMute ON (AutoMute on)

In this setting, the STi-R’s audio alerts will

initially be at the volume you set, but after

a few seconds, the STi-R will automatically

reduce the volume level, to keep you

informed, but not annoyed. (factory

default)

aMuteOFF (AutoMute off)

With AutoMute off, the STi-R’s audio alerts

will remain at the volume you set for the

duration of the radar encounter.

Pilot (Power-on indication)

Pilot HWY (Full description)

In this setting, the STi-R will display

“Highway,” “AutoScan,” “City,” or “CityNox”

as its power-on indication. (factory default)

Pilot H (Letter)

In this setting, the STi-R will display “H”

for Highway, “A” for AutoScan,“C” for City,

and “Cnx” for City NoX.

Pilot V (Vehicle voltage)

In this setting, the STi-R will continually

display “H” for Highway, A” for

AutoScan,“C” for City, and “Cnx” for City

NoX, and the vehicle’s voltage.

NOTE: A high or low voltage warning is

given any time the vehicle’s voltage

drops below 10.5 volts, or goes above

16.5 volts. This feature is always on,

regardless of the Pilot setting.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments