Beltronics RX45 Specifications download pdf (Page 8)

There are 5 user-selectable programming

options on the RX45. This allows you to set

it up the way you prefer.

To access Programming, simply press

the buttons that are normally used for

brightness (BRT) and sensitivity (SENS) at

the same time. Once you access

Programming, the BRT button is used to

review (RVW) the categories and the SENS

button is used to change (CHG) items

within the category. Pages 14-15 explain

each option in more detail.

How to use Preferences

1 To enter Programming, press both

buttons and hold for 2 seconds. The

RX45 will beep and display

Program.

(Brightness is at maximum during this

process.)

2 Then press the RVW button to review

the current settings. You can either tap

the button to change from item to item, or

hold the button to scroll through the items.

3 Press the CHG button to change any

setting. You can either tap the button to

change from setting to setting, or hold the

button to scroll through all the options.

4 To leave Programming, simply wait 8

seconds without pressing any button.

The unit will display

Complete, beep and

return to normal operation.

To quickly return to all of the factory

defaults, press and hold the BRT and SENS

buttons while turning on the unit.

Press the REVIEW button

to go from one category

to the next

PILOT LIGHT

(Power-on indication)

SIGNAL STRENGTH METER

AUTOMUTE

VOICE

BANDS

* Factory Default Settings

To reset the RX45 to its original

factory settings, press and hold

the “BRT” and “SENS” buttons

while turning the power

on.

The display will provide a

Reset message, accompanied

by an audible tone,

acknowledging the reset.

An example

Here’s how you would turn the RX45’s

AutoMute feature off.

1 Enter Programming by holding both

buttons down for 2 seconds. The RX45 will

beep and display

Program.

2 Then hold the RVW button down.

The RX45 will scroll through the categories,

starting with Pilot (

Pilot), then Signal

Strength Meter (

Meter), then AutoMute

(aMute).

3 Release the RVW button when the

display shows

AutoMute. Since the

factory setting is for AutoMute to be on,

the RX45 will display

aMute ON.

If you accidentally don’t release the

RVW button in time and it goes to the

next category, simply hold the RVW button

down again until

aMute is displayed.

4 Press the CHG button to change from

aMute ON to aMute OFF.

5 To complete this change, simply wait 8

seconds without pressing any button

. The

display will provide a

Complete message,

accompanied by an audible tone. This is

an indication that the RX45 has returned

to its normal operation.

Pilot HWY

Pilot H

Pilot V

Meter STD

Meter THT

Meter TEC

aMute ON

aMute OFF

Voice ON

Voice OFF

Bands DFT

Bands MOD

X ON

or OFF (default is on)

Ku ON or OFF (default is off)

K ON or OFF (default is on)

Ka ON or OFF (default is on)

POP ON or OFF (default is off)

SWS ON or OFF (default is off)

LSR ON or OFF (default is on)

TSR ON or OFF (default is off)

Press the CHANGE button

to change your setting

within a category

* Full word: Highway, AutoScan, AutoNoX

Letter: H or A or ANX

Vehicle voltage

* Standard signal strength meter

ThreatDisplay

TechDisplay

* AutoMute on

AutoMute off

* Voice alerts on

Voice alerts off

* Factory default settings

One or more bands have been changed

Turn bands on or off by pressing

and holding the V•MUTE button

How to use Preferences

12

Overview of Preferences

13

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments