Beltronics Express 925 Specifications download pdf (Page 18)

signal's range very quickly and receive only a brief alert.

Although many times the probable source of the false signal

can be identified (supermarket, bank, commercial building,

etc.), caution is advised until the source can be confirmed.

The X band alert pattern caused by a non-police source can

look like the initial alert produced by actual police Radar. For

this reason appropriate action is required any time an alert is

received.

Laser Alerts

When Laser is detected, a flashing “L” will appear in the

Digital Display.

If a vehicle is a long distance from the source of Laser pulses,

fewer pulses will generally be received. The closer the vehicle

is to the source of Laser pulses, the greater the likelihood of

receiving a steady stream of Laser pulses. The reason for this

is the aiming stability of the Laser gun and the fact that it is

impossible to hold the gun absolutely still. Any movement of

the gun results in motion of the beam at the target. The further

the target, the greater the displacement of the beam and the

shorter the dwell time of the beam at the target point. There-

fore, there is the possibility of receiving only a few Laser pulses.

Due to these characteristics, all Laser alerts received from

your unit should be taken seriously.

VG-2 Guard

Alert

Whenever your EXPRESS unit detects signals from the

Interceptor VG-2 (Radar Detector Detector), the VG-2 Guard

feature engages, alerting you to the presence of the Interceptor

VG-2. (VG-2 Guard

must be selected ON—see page 8 for more

information on Selectable Features). A distinct, 2-second

audio warning coupled with the Digital Voice announcement of

“VG-2 Alert” and the flashing of the “H”, or “A” in the Digital

Display confirms activation of the VG-2 Guard

feature.

This flashing continues for as long as VG-2 Guard

is activated. During the VG-2 alert your unit does not detect

Radar or sws

™

signals. However, the presence of the

Interceptor VG-2 indicates that traffic is being monitored and

speed measurements may be taken. When the “H” or “C” stops

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Beltronics Express 925 Specifications Page 18